Micfil Fuel & Oil ultra fine Filters

Micfil Fuel & Oil Filters Logo Micfil Filtration System Diagram

Micfil Ultra Fine Filters are suited for the filtration of engine oil, gearbox oil, and hydraulic oil, as well as for fuel. With engine and gearbox oil, the filter is placed in a bypass. For fuel it is in the main stream, and for hydraulic oil it is in the return. The units can be installed in all engines and all machinery, either as main filters or as after-market filters.

The patented Micfil Ultra Fine Filter insert consists of a tear-resistant fibre mesh with woven-in cellulose fibres of the highest quality. The filtration performance is down to 0.5µm (microns). The Micfil Ultra Fine Filter inserts possess a very high contamination absorption capacity, long life span, lower differential pressure and are water absorbent.

Micfil Range of Fuel and Oil Filters

They will reduce frictional wear, lengthen machinery life spans, and lower maintenance costs.

The Micfil Ultra Fine Filter possesses approximately 20 times higher filtration performance than a standard filter. Dirt, combustion, oxidation, and abrasion particles of up to approximately 0.5 μm in size are continuously filtered out from the oil, thereby minimising abrasion.

Most Standard Filters allow particles smaller than 10 microns
to remain in the fluid, leaving the fluid contaminated.

Micfil Particle Diagram
Micfil Diesel Filter AL150

MICFIL DIESEL FILTER AL150
STOCK CODE: 3150

Micfil Oil Filter AL150

MICFIL OIL FILTER AL150
STOCK CODE: 3151

Micfil Refill Filter AL150

MICFIL REFILL FILTER AL150
STOCK CODE: 3152

Micfil Diesel Filter AL300

MICFIL DIESEL FILTER AL300
STOCK CODE: 3300

Micfil Oil Filter AL300

MICFIL OIL FILTER AL300
STOCK CODE: 3301

Micfil Refill Filter AL300

MICFIL REFILL FILTER AL300
STOCK CODE: 3302

Specification Table for Micfil Models

Micfil Technical Specifications Table

* 20 bar Filters available on request
(1) The patented Micfil Ultra Fine Filter element consists of a tear-resistant fibre mesh with woven-in cellulose fibres. The filtration performance is down to 0.5 microns. The element possesses a very high contamination absorption capacity, long life span, lower differential pressure and is water absorbent.
(2) Two or more Micfil filters can be installed in line to increase flow/tank capacity.
ie. Fuel flow rates from 350 L/h to 15,000 L/h are available.

AVAILABLE EXCLUSIVELY FROM:

Contact Us at Pro Quip for more information

Contact Us about this product

BACK TO TOP